Menu
X
.jpg?imageView2/2/format/jp2)
Full consideration should be given to the selection of the brake chamber. The first thing to consider is whether the products we purchase can meet our types and specifications, so that our installation is more reasonable.In the selection process, because of the effect of braking, we have to ma
Read More
In order to better use the current vehicles, we should make reasonable selections in the selection process to prove that the vehicles we select are more suitable for our use. The brake chamber can provide us with strong power. , So how do we strictly control comfort when we choose?It uses the
Read More
1. The brake chamber is a kind of metal product, so we should make a reasonable selection of production materials. The metal manufacturing industry belongs to the hardware industry, and the metal stamping industry is an industry involving an extremely wide range of fields, which penetrates all aspec
Read More
As a vehicle accessory, it is easy to rust and corrode when it is damp, and it will affect the performance of the vehicle when it is severe. Therefore, we must ensure that the vehicle accessories are moisture-proof and perform timely scrubbing to prevent water vapor erosion.In order to prevent
Read More
First of all, we should understand the braking law of the vehicle. The maximum braking force of the vehicle is limited by the adhesion between the tire and the ground. Braking alone may cause some damage to our vehicle by default. When the braking force is equal to the adhesion, the wheels will stop
Read More
In the process of production, the brake chamber should be used to overcome the defects in the use of the car, and let our air chamber be standardized. Only in this way can we use it more reasonably.The production of the air chamber manufacturer should be in accordance with the relevant scienti
Read More
The brake air chamber is a clamp clamp diaphragm type. The braking force before and after the odor is different, so the front and rear brake chambers are different in size, but the structure is the same. It consists of air intake, cover, diaphragm, support plate, return spring, housing, push rod, It
Read More
Reasonable observation is very necessary. This can further reduce the maintenance time and prevent further damage to the T30 single-chamber brake chamber. Unscrew the semi-trailer pneumatic connection disconnect switch on the tractor to make it in a ventilated state. Then observe.Of cours
Read More
1. Piston brake chamber, its working method is very flexible, and the brake formation generated during braking is also very large, so because the brake formation is relatively long, it will wear out the diaphragm during work. It is also very small, which makes the service life longer.2. G
Read More
Now when using the brake chamber, our manufacturers should scientifically master the relevant experience, to further ensure that our air chamber is used more reasonably, and to ensure that our accessories have a longer service life, then how should we ensure that it is in use Will no damage occ
Read More
When our car is started, air will enter the brake chamber from the air intake. At this time, the accessories inside the chamber will work, and the diaphragm will be deformed under the action of air pressure, so that it is pushed by Kia. Push the push rod down to automatically adjust the rotatio
Read More
1. The driving temperature of the vehicle is affected by a certain working environment. If the driving temperature is too high, it will change the working environment and cause the wear and tear between accessories to be affected to a certain extent, so sometimes it will be caused by long
Read MoreViews Faq
Copyright@ 2020 JIAXING SHENGDING MACHINERY CO.,LTD. All Rights Reserved
英语
中文简体
德语
俄语
西班牙语
法语