1. Eliminate the brake system bolts to be screwed to the bottom
After installing the high-quality air chamber to the rear axle of the vehicle, special attention should be paid to screw the brake elimination bolt all the way to the bottom. After loosening the brake elimination bolt, turn it 90 degrees and then remove the special part placed in the middle casing. In this operation process, special attention must be paid to put the handbrake valve handle on the part of the brake release system, so that it is easier to screw the release brake system bolt at that time.
2. Do not disassemble the air chamber casually
Because there are springs with great interaction force in the air chamber, in order to prevent the large spring from being ejected and causing accidents, you must not disassemble it by yourself when using the air chamber. If, for some reason, it must be disassembled, it should also be disassembled by professional and technical personnel. After reassembly, also make sure that the two bolts connecting the air chamber to the middle of the brake system cam bracket are tight.
3. Regular inspection and maintenance
In order to make the air chamber maintain stable performance for a long time, special attention should be paid to checking its working conditions frequently, and the air chamber should be maintained quarterly. The air chamber is disassembled by technical professional technicians for cleaning and adjustment, and the damaged parts are immediately replaced.
chinasand.cc